Course Catalogue

Leadership for Safety Excellence - Alberta Only

Designed for municipal supervisors and front-line leaders, this course helps participants understand their role in supporting their health and safety management system.

Daily Trip Inspection Training

This online course provides instruction on how to complete a Daily trip Inspection that follows the National Safety Code (Standard 13) regulations.

Vehicle Mounted Aerial Lift (Bucket Truck) - Operator Safety (CAN)

This online Vehicle Mounted Aerial Lift course covers important aspects of vehicle mounted aerial lifts including inspections, hazards, safe operation, rigging, and components.

Daily Pre-Trip Inspection

This online course provides drivers with an understanding of how to properly perform their required inspections, as per National Safety Code compliance, and explains how to address any defects that...

Ground Disturbance 201

This online Utility Safety Partners (USP), formerly the Alberta Common Ground Alliance (ABCGA), endorsed course is designed for planners, managers, supervisors, and employees who are required to...

Commercial Weights and Dimensions

This online course is designed as a general guideline to help commercial vehicle operators understand Alberta weight and dimension limits and the importance of adhering to them.

Cargo Securement

This online Cargo Securement Basics course is designed to teach you how to secure your cargo in accordance with the North American Cargo Securement Standard (National Safety Code – Standard 10).

Basic Load Securement Training

This training module has been designed to assist with instruction in Basic Load Securement and reviews the fundamental information required in the Alberta Regulations Standard 10.

WHMIS 2025

In Canada, the Workplace Hazardous Materials Information System (WHMIS) is used communicate and identify the risks associated with products.

Provincial Hours of Service (Alberta)

This online Provincial Hours of Service (Alberta) course explains the hours of service limits set out by Alberta Regulation 317/2002 and how they apply to provincially regulated carriers and drivers.

Provincial Hours of Service Course Alberta Regulations

This course outlines the regulations a driver must follow when operating under the Alberta provincial hours of service rules.

Defensive Driving - Large Vehicles

This online Defensive Driving for Large Vehicles course is designed to provide drivers of large vehicles with the knowledge and safe driving techniques they need to prevent collisions and violations.

Federal Hours of Service Course - Canadian Regulations

This Canadian Hours of Service course covers the regulations that a driver must follow.

Rigging and Slinging (Advanced)

This online Rigging and Slinging (Advanced) course covers the regulations, practices, and techniques required to safely sling and rig loads.

AMA Demerit Reduction Defensive Driving - Alberta Only

This AMA-certified online Demerit Reduction Defensive Driving course helps Alberta licence holders sharpen hazard recognition and safe driving habits while removing up to three demerit points from their driving record.

Traffic Control Persons for Construction (Flagger)

This course is designed to teach you the various techniques, equipment, and legal requirements for Traffic Control Persons in a road construction environment.

Rigging (Basic)

This online Basic Rigging course covers the basic responsibilities, practices, and techniques required to safely sling and rig loads.

Workplace Inspections

This course will help you conduct effective workplace inspections and will explain the tools that help improve your inspection system.

Hazard Identification, Assessment, and Control

This online Hazard Identification course will help keep you safe on the job by showing you how to prevent injuries and illness in the workplace through hazard identification, assessment, and control.

Traffic Control Persons for Construction in Ontario

This online Traffic Control Persons for Construction in Ontario course explains the techniques, equipment, and legal requirements for traffic control persons in a construction environment.

Propane Handling and Exchange

This online Propane Handling and Exchange course is designed to familiarize you with the dangers of propane, control methods to mitigate hazards, and the requirements for transporting, handling...

Confined Space Entry and Monitor

This online Confined Space Entry and Monitor course defines confined and restricted spaces, explains the hazards associated with them, and provides methods for assessing, eliminating, controlling...

Supervisor's Role

As a supervisor you have a great deal of responsibility for the health and safety of your staff. You also have influence on how workers act and how they perform their jobs.

Gas Detection

This online Gas Detection and Nitrogen Awareness course is designed to increase your knowledge of atmospheric hazards, gas detection methods, electronic sensor types and their operation, and...

Hours of Service - Canada

This online course is designed to provide an overview of Canada’s Federal Hours of Service regulations and enable an understanding of the legislation.

Chainsaw Safety - Training

This online Chainsaw Safety course is designed to teach you how to operate and control your chainsaw both safely and effectively.

Ground Disturbance 201 (BC)

This BC Common Ground Alliance (BCCGA) endorsed course is designed for planners, managers, supervisors, and employees who are required to develop, plan, or undertake any kind of ground disturbance.

Telehandler Certification

This comprehensive online Telehandler Certification course covers the fundamentals of safe operation for the different classes of variable reach lift trucks (VRLTs).

Firefighting & Fire Extinguisher Safety

This online course provides the basic knowledge and skills required to fight a small fire.

Weights & Dimensions (Safety Laws)

This training module has been designed to assist with instruction in Weights & Dimensions and Safety Laws and reviews the basic information required in the Alberta Regulations.

Aerial Work Platform (AWP) Certification

This comprehensive Aerial Work Platform (AWP) Certification course covers all scissor, push-around, straight-stick boom, and articulating boom lifts.

Leadership for Safety

This online Leadership for Safety: A Leadership Approach to Safety course is designed to offer a foundational understanding of the contemporary leadership principles required to begin the journey...

Cargo Securement (Flatbeds)

This online Cargo Securement (Flatbeds) course is designed to teach you how to secure your cargo to your flatbed in accordance with the North American Cargo Securement Standard (National Safety Code...

Aerial Lift Safety - MEWPs (CAN)

This online Aerial Lifts and Scissor Lifts course covers the safe operation, inspection and anatomy of powered industrial aerial and scissor lifts.

Detection and Control of Flammable and Toxic Atmospheres

This online course provides information about how to detect and control flammable and toxic atmospheres while working around potentially dangerous gases.

Fall Protection (OSHA)

An OSHA-Compliant Training Class Online for Fall Protection (for both Construction and General Industry). This course covers: fall prevention, restraint and arrest across a variety of applications.

Rigging - Level 1

The most current ASME standards were used to create this new 2020 Rigging - Level 1 course which covers rigging techniques, inspections, and clarifies rigging misconceptions.

Transportation of Dangerous Goods (TDG)

This online Transportation of Dangerous Goods (TDG) course is designed to teach individuals about regulations governing the transportation of dangerous goods within Canada.

Hazard Assessment Safety

This online course provides an understanding of the importance of hazard assessments, as well as their impact on the overall performance of health and safety management systems.

Defensive Driving

This online Defensive Driving Awareness course informs you on how to safely operate your vehicle in all weather conditions, perform vehicle maintenance, and prepare yourself mentally for driving.

Telehandler (Variable Reach Forklift)

This online Telehandler (Variable Reach Forklift) course is designed to help you develop the competency needed to operate your telehandler safely.

Confined Space Entry (Alberta)

This online course provides important information to individuals required to work within a confined space for Alberta.

Fall Protection (Awareness)

This course is an online CSA Compliant Training Class for Fall Protection (for both Construction and General Industry) in Canada.

Confined Space - Awareness Training (CAN)

This course will focus on general safety principles and provide information that will increase your recognition of potential confined spaces, improve your knowledge of safe operations, and keep you...

Supervisory & Management Skills

Participants will improve their skills in leadership, management and supervision of staff.

Aerial Platform – Boom & Scissor

This online Aerial Platform – Boom & Scissor course aims to reduce the risks related to straight telescoping boom, articulating boom, and scissor lift type mobile elevated work platforms (MEWPs) by...

Fall Protection

This Fall Protection course is designed to teach you the basics for effectively using, inspecting, and planning for fall protection.

Forklift Training (Counterbalanced)

This online course aims to reduce the risks related to sit-down, vertical mast forklifts by teaching how to become a safe lift truck operator.

Transportation of Dangerous Goods Canada (TDG)

This Transportation of Dangerous Goods Canada (TDG) online course provides an overview of the TDG regulations that must be followed when shipping or receiving dangerous goods.

Federal Hours of Service Course - Canadian and US Regulations

This Canadian and US Hours of Service course covers the regulations that a driver must follow.

Vehicle Inspections: Straight Truck Series

This online Vehicle Inspections: Straight Truck Series course is designed to demonstrate the critical vehicle inspection skills required for straight truck drivers.

Chainsaw Safety Awareness

Chainsaw safety is critically important, as chainsaws are often the most dangerous tool on a work site. This online course will increase understanding of the dangers of chainsaws and the steps required to operate them safely.

Rigging (Intermediate)

This online Intermediate Rigging course covers the regulations, practices, and techniques required to safely sling and rig loads.

Industrial Safety Orientation

This online Industrial Safety Training System (ISTS) orientation course meets BC, Alberta, and Saskatchewan legislative requirements, and introduces workers to the basic principles of hazard...

Risk Assessment (CAN)

This is a Canada-compliant safety training course intended for those conducting risk assessments.

Ground Disturbance 101

This online Utility Safety Partners (USP), formerly the Alberta Common Ground Alliance (ABCGA), endorsed course is designed for operators, labourers, and employees who are required to have knowledge...

Crane Load Chart Reading and Calculations

This online Crane Load Chart Reading and Calculations course is designed to teach mobile crane and boom truck operators, riggers, and supervisors alike the importance and function of load charts.

Health & Safety Committees and Representatives – Online

This on demand course is designed to provide the Health and Safety Committee (HSC) members and Health and Safety Representatives (HSR) an understanding of their legislated duties and responsibilities.

Sit Down Forklift - Operator Safety (CAN)

This online Sit-Down Forklift course covers important aspects of sit-down forklifts, including their inspections, safe operation, maintenance, and components.

The Respectful Workplace

This online course for managers, supervisors and employees describes the characteristics of a respectful workplace, demonstrates various types of harassment and bullying, and gives a comprehensive...

Fall Protection Training

This online Fall Protection Training course covers the basics of fall arrest, travel restraint, and work positioning, including fall protection definitions, calculations, and rescue planning.

TDG Transportation of Dangerous Goods- Clear Language Canadian Edition

This comprehensive TDG training program is designed to provide both generic information on all aspects of TDG, in addition to facilitating specific to the worksite.

Accident Investigation

When accidents happen, it's important to know why. Even when the reason seems obvious, the real cause may be more complicated. That's where accident investigation comes in.

Defensive Driving (CAN)

This online defensive driving training provides a quick, simple and effective way to get workers Canada compliant.

Workplace Incident Investigation

The purpose of this lesson is to familiarize employees with the common procedures of conducting an incident investigation, specifically an incident involving an injury.

Naturally Occurring Radioactive Material (NORM)

This online Naturally Occurring Radioactive Material (NORM) course aims to equip workers who may be exposed to NORM with a basic knowledge and understanding of NORM and the Ludlum 3-97 radiation...

Overhead Crane - Operator Safety (CAN)

This online Overhead Crane course covers types of cranes and lifting devices, how to inspect and safely operate them, and how to recognize the common hazards that surround their use.

Skid Steer Loader

This online Skid Steer Loader course is designed to teach you how to be a skilled and safe skid steer loader operator.

Wilderness & Bear Awareness

This online Wilderness Awareness course provides essential information for people working or enjoying recreational activities in wilderness environments.

Excavator - Operator Safety (CAN)

This online training course for Excavators (Trackhoe, 360-Excavators) will help employers and operators complete OHS-compliant operator safety training and properly record it.

ATV/UTV Safety

This online ATV/UTV Safety course is designed to equip you for the safe operation of ATVs and UTVs in both common and hazardous situations.

Hours of Service

Learn how to safely manage driving hours and prevent fatigue-related risks by following Transport Canada’s Hours of Service regulations.

Fall Protection (Alberta)

This Fall Protection (Alberta) course teaches you how to effectively use fall protection equipment and plan for falls.

Cargo Securement (Canada)

This is a Canada-compliant safety training course intended for anyone loading and transporting cargo on flatbed trucks.

Skid Steer (Rubber-tired & Track Loader) - Operator Safety (CAN)

A Canada-Compliant Training Class Online for Skid Steers (Rubber-Tired, Track Loaders, Multi-Terrain Loaders).

Joint Health and Safety Committees and Health and Safety Representatives: Foundations

This Joint Health and Safety Committees (HSC) and Health and Safety Committees (HSR): Foundations course meets the minimum mandatory training requirements that all HSC members and HSRs must receive...

Pipeline Construction Safety Training (PCST)

Pipelines enable the safe flow of oil and natural gas into domestic and international marketplaces.

Propane Handling & Exchange

This course will teach the basics of safe handling and exchange of propane cylinders, as well as how to inspect cylinders and deal with emergency situations.

Confined Space Entry and Monitor (SCS)

This online Confined Space Entry and Monitor course provides information to individuals required to perform tending worker duties to personnel working in a confined space.

Telehandler - Operator Safety (CAN)

This online Telescopic Handler course covers important aspects of telescopic handlers including their components, inspection, records, hazards, and safe operation.

Fatigue Management Training for Workers Certification

This Fatigue Management Training for Workers Certification course is designed to help you understand the health and safety impacts of fatigue as well as employer and worker responsibilities in terms...

Trip Inspections for Buses and Vans

This course describes the regulations a driver must follow when completing a trip inspection. Trip Inspections are an important part of carrier safety .

Fall Protection - Construction

To make all employees working in the construction industry aware of the requirements for use of fall protection, work positioning, fall restraint, and fall arrest systems.

Distracted Driving Prevention

This training is designed to help drivers stay focused on the road, recognize the signs of a distracted driver, and understand how to manage distracted drivers.

Workplace Harassment and Violence Prevention

Containing mandatory Sexual and Workplace Harassment, Bullying and Violence Prevention training, this online course package covers key elements of Sexual and Workplace Harassment including...

Workplace Bullying and Violence Training for Employees

This online course helps employees learn how to deal with bullying and violence in the workplace.

Defensive Driving Fundamentals & Attitudes

This award winning internationally recognized comprehensive blended Defensive Driving and Driver Attitude program focuses on Driver Attitude and Defensive Driving skills.

National Safety Code Overview

This online National Safety Code Overview course is designed to cover the basics of the NSC and its 16 standards.

Basic Rigging Principles

Rigging is a process used to secure materials to be moved by cranes, hoists or other lifting equipment. There are many factors to consider when applying slings and chains to secure a load.

Bear Awareness Online

This online course provides essential information for people working, hunting, camping, or travelling in bear country.

Due Diligence for Supervisors (Online)

Learn as Milo, the Lead Occupational Health and Safety Officer, Bellamy Barrier, the Safety Manager, and a handful of supervisors guide learners through the three types of safety laws, and how those...

Load Securement and Distribution

This online Load Securement & Distribution course is designed to detail the cargo securement and distribution regulations in the United States and Canada for most types of cargo.

Rigging Safety Training

This lesson will teach you how to safely rig loads that will be moved by cranes, hoists, or other equipment.

AMTA (2024) Provincial Hours of Service (Alberta)

Provincial Hours of Service (HOS) regulations are crucial in the driving industry, especially in sectors such as commercial trucking, where dangerous fatigue-related incidents may occur.

Reasonable Suspicion Awareness Training for Supervisors

This course provides the information supervisors require to identify circumstances and manage potentially unsafe circumstances indicative of drug or alcohol use.

Weights and Dimensions

This course provides an overview of commercial vehicle weight and dimension regulations across Canada, helping drivers understand compliance requirements to ensure road safety and avoid penalties.

Confined Spaces: Entry Team Training - Maintenance Activities

Course is designed to decrease the number of injuries and fatalities that result from working in or around permit-required confined...

Personal Protective Equipment for Employees (PPE)

This course teaches students about the basics of personal protective equipment (PPE).

Cargo Securement - Alberta

This course provides an overview of cargo securement requirements in Alberta, aligning with the National Safety Code and provincial regulations.

Fire Extinguisher Safety for Canada

If you were confronted with a fire in your workplace, would you know whether to fight or flee? If you decide to fight the fire, do you know what to do?

Basic Rigger and Signalman (OSHA)

An OSHA-Compliant training course online for riggers and signalers.

Transportation of Dangerous Goods - TDG

In Canada, federal and provincial and territorial legislation governs the transportation of dangerous goods.

Canadian Harassment, Bullying, and Workplace Violence Prevention

This online course is targeted for Managers, Supervisors & Employees.

Working Alone

This online Working Alone course is designed to provide the knowledge and skills necessary to mitigate working alone hazards and respond to incidents involving employees who work alone.

Fatigue Management - Supervisors and Drivers

This course equips both drivers and supervisors with the knowledge and tools to recognize, prevent, and manage fatigue effectively.

Mobile Elevated Work Platforms

Working safely with this last category will be the focus of this course. Ideal learners include employees who work on or around aerial lifts and scissor lifts.

Aerial Lift Safety - MEWPs (OSHA)

This online Aerial Lifts and Scissor Lifts course covers the safe operation, inspection and anatomy of powered industrial aerial and scissor lifts.

Violence and Harassment in the Workplace

Workplace harassment can undermine a person’s dignity. It can prevent workers from doing their job effectively.

Health and Safety Committees and Representatives - Alberta Online

Health and Safety Committees and Representatives - Alberta Online, virtually guides participants through a methodical delivery of guiding documents and legislative requirements of the Alberta OHS...

Lockout Tagout (LOTO) - Worker Safety (OSHA)

This is an OSHA-Compliant Training Class for Lockout/Tagout procedures.

Propane Handling

Built in 2025, this course follows the CSA Code, TDG Act regulations, WHMIS standards, and CEPA guidelines to provide the knowledge to work safely with propane.

Establishing Leadership Presence - 12 Steps

How are you going to be recognized as a leader in your field, your company, or your organization?

Alberta Provincial Hours of Service (School Bus and Passenger Bus/Van)

This course outlines the regulations a driver must follow when operating under the Alberta provincial hours of service rules.

Knuckle Boom Truck Safety (CAN)

This online course is designed to meet the training requirements for powered industrial articulated boom trucks, also known as knuckle boom trucks.

Boom Truck Safety

This online course provides the knowledge required to safely inspect, maintain, and operate boom trucks as well as read and interpret load charts.

Forklift Training

This online Forklift course is designed to help you meet OSHA forklift training requirements while keeping both operators and pedestrians around forklifts safe.

Behaviour-Based Safety (BBS)

Workplace injuries are costly. They are also foreseeable and preventable.

TDG - Transportation of Dangerous Goods: Canada

This course has been designed to help learners transport dangerous goods safely and properly by educating them on the Canadian TDG Act and its associated regulations.

Alcohol and Drug Awareness - Fit for Work

This online Alcohol and Drug Awareness course emphasizes the seriousness of being “fit-for-work” and identifies personal responsibilities as they relate to ensuring the health and safety of all...

Falling Objects (CAN)

This is a Canada-compliant safety training course intended for anyone working around potential falling objects. Topics covered in this training include safety principles, controls, and hazards.

TDG - Transportation of Dangerous Goods: Canada/US

This course has been designed to help learners transport dangerous goods safely and properly by educating them on the Canadian TDG Act and its associated regulations.

Heavy Construction Safety Association of Saskatchewan (HCSAS) Workzone Flagperson Training

This online Flag Person course (2019) is designed to teach the student how to control traffic safely on Saskatchewan roadways.

Lockout Tagout in the Workplace

This comprehensive online Logout Tagout in the Workplace course covers the steps to correctly lock and tag out equipment, devices used for lockout tagout, and the elimination of potentially fatal...

Traffic Control for 2025 and Beyond

This Canadian-focused training program equips participants with the essential knowledge, skills, and certification required to safely manage traffic in and around construction zones, roadwork areas...

Effective Supervision

In the increasingly competitive marketplace of today, people are the most valuable resource in an organization. Effectively supervising this resource is crucial to success.

North American Cargo Securement

Built in 2025, this course provides an overview of cargo and load securement and what you need to know to arrive safely at your destination without delays or mishaps.

Bloodborne Pathogens US

The goal of this training is to educate employees to minimize their exposure to bloodborne pathogens.

Lockout / Tagout: Put a Lock on Hazardous Energy

This online course helps stop unexpected startups with critical info on OSHA lockout/tagout requirements.

Workplace Bullying and Violence Training for Supervisors

This online course helps supervisors learn how to deal with bullying and violence in the workplace.

Load Securement for Heavy Equipment (US)

The North American Cargo Standard forms the basis for the cargo securement and distribution regulations in the United States and Canada.

Cyber Security Awareness

An organisation's people, information, operations and systems are critical assets.

Confined Space - Awareness Training (OSHA)

This course will focus on general safety principles and provide information that will increase your recognition of potential confined spaces, improve your knowledge of safe operations, and keep you...

Log Book Auditing Federal (Canada Only)

This course outlines a basic understanding of Federal Canadian Hours of Service regulations which assists in following the Federal requirements for driver log auditing and report writing.

Trenching and Shoring Safety in Construction Environments

This online Trenching & Shoring Safety in Construction Environments course helps facilities comply with OSHA's regulations and safe work practices that can prevent accidents from occurring.

Electrical Safety and Lockout/Tagout - International

This training will tell you more about electrical hazards, safe practices when working with electricity, and the lockout/tagout program and how it can save your life.

Cargo Securement and Safety Laws for Buses and Vans Online

This course reviews the general cargo and safety regulations a driver must follow. These regulations are in place to promote safety the safety of the public, passengers and the driver.

Rigger and Signalperson (Advanced) (CAN)

This is a Canada-compliant safety training course intended for experienced riggers and signalers.

Distracted Driving Awareness Training

This online Distracted Driving course provides the information employees need to drive cars, vans and small trucks safely.

Vehicle Mounted Aerial Lift (Bucket Truck) - Operator Safety (OSHA)

This online Vehicle Mounted Aerial Lift course covers important aspects of vehicle mounted aerial lifts including inspections, hazards, safe operation, rigging, and components.

CPR/AED/First Aid (OSHA)

This is an online First Aid, CPR and AED Training course. This course administered in accordance with the most current ECC/ILCOR and AHA guidelines. This course is OSHA-Compliant.

Pre-Trip Inspections

Made in 2025, this course explains the importance of a daily pre-trip work inspection, as well as the steps needed to carry one out in order to keep yourself and others safe.

Fall Protection (Can)

This Fall Protection (Awareness) course is designed to teach you the basics of fall protection so that you can recognize and use the various fall protection systems available to you.

Forklift Operator - Loadhandling

This lesson is designed to provide workers with an awareness of the federal safety regulations for operating a forklift.

ICS 100

The Incident Command System (ICS) I-100 introduces and provides the foundation for higher level ICS training.

Lead Awareness (OSHA)

An OSHA-Compliant Training Class for Lead. Quiz questions along the way prepare you for the final written exam. Upon completion, you will be able to print your certificate and wallet card.

How to Prevent Lost Time Claims with Strategic Claims Management (WCB)

If you give people valuable information, they make good choices and can manage any situation.

Personal Fall Arrest Systems

The goal of this lesson is to enable learners to recognize the hazards posed by falling four or more feet (1.2 m), and where personal fall arrest systems are used as fall protection, to recognize...

Silica Hazards

This lesson is designed to improve the safety of workers in environments where silica exposure hazards exist by increasing employee awareness of this hazard and by demonstrating how the hazard can...

Wilderness Awareness

This online course offers own professional Wilderness Awareness training course for industry and the general public.

Construction Safety Orientation

You should expect to go home unhurt at the end of your work day. Accidents and injuries are preventable and occur because of unsafe conditions and unsafe acts.

Due Diligence for Supervisors

This online Due Diligence for Supervisors course is designed to help supervisors meet their obligations for safety in the workplace by defining due diligence and describing what employers and...

Bloodborne Pathogens (BBP) - Worker Safety (CAN)

Bloodborne Pathogens training for Canada compliance (OHS, CSA.). This course satisfies the requirements for the classroom training.

Lockout/Tagout (LOTO) (US)

Would you stick your hand into a machine and hope no one turns it on? You can guarantee the machine stays off by locking and tagging it out.

Lockout Tagout (LOTO)

This comprehensive online Lockout/Tagout Training (LOTO) course informs you on how to explain LOTO and when it should be used, understand the dangers of hazardous energy, and describe the basic...

Construction Safety for Supervisors

The construction safety course is designed for construction owners, managers, estimators, supervisors and new safety representatives.

Asbestos Safety Awareness Course

Before exposing your employees to the hazards of Asbestos, make sure they have the knowledge and skills necessary to protect themselves and those around them with the most comprehensive online...

Confined Space Competent Person (CAN)

This is a Canada-compliant safety training course intended to teach employees the duties of a competent person when working around or in confined spaces.

Rigger and Signalperson (Basic Introduction) (CAN)

This is a Canada-compliant safety training course intended for new riggers and signalers.

Scaffolding - Safety Training (CAN)

This online training course for Scaffolding Safety will help employers and operators complete Canada-compliant operator safety training and properly record it.

Telehandler - Rough Terrain Forklift Training

The course is the knowledge component of this two part telehandler training.

Confined Space Entry Awareness

This online Confined Space Entry Awareness course is designed to provide you with basic knowledge and training regarding confined and restricted spaces and their associated hazards.

Hot Work: Safety Operations Training

This online Hot Work: Safety Operations Training course is designed to guide employees directly involved in hot work operations through the hot work process, helping to prevent injuries and damage...

Scissor Lifts in Industrial and Construction Environments

This online Scissor Lifts in Industrial and Construction Environments course introduces employees to scissor lifts, make them aware of the hazards associated with these lifts and give them the...

OHV (ATV, UTV) - Operator Safety (OSHA)

An OSHA-Compliant Training Class Online for OHVs (ATV, UTV).

Inspections and Observations

In this course, you will learn how you can use inspections and observations to promote safety in your workplace. Ideal learners include managers, supervisors, safety committee members.

DOT Cargo Securement

This course on DOT Cargo Securement discusses the goals of the DOT’s Cargo Securement Standard, the requirements that the Standard places on motor carriers and drivers, and what drivers should do to...

Working Alone Awareness Training

This online Work Alone Awareness course equips you with the information needed to understand laws concerning working alone, teaches you how to recognize unclear and changing work alone situations...

Digger Derrick Operator Training (CAN)

A Canada-compliant online training class for Digger Derricks. This course satisfies Canada's requirements for the classroom portion of operator safety training.

Workplace Investigations

This online Workplace Investigations course walks you through the process of workplace investigations and how these can be used to build a better, and safer, workplace.

Fire Extinguisher (CAN)

This course is a complete safety training course for Fire Extinguishers. Quiz questions along the way prepare the trainee for the final written examination.

Building a Lasting Culture of Safety

We all want to be safe. Nobody ever plans to spend part of their working day being taken to the emergency room – except doctors, of course, but even they don’t want to be taken there in an ambulance.

Asbestos Awareness (CAN)

An Canada-Compliant Training Class Online for Asbestos - General Awareness (construction and general industry).

Safe Backing Procedures and Blind Spots

This online Safe Backing Procedures and Blind Spots course provides important information to individuals operating motor vehicles for both company and personal use.

Productive Communication Conflict Management

This Productive Communication Conflict Management Training will provide a step-by-step approach to manage conflict using a variety of communication and emotion management strategies to effectively...

Chainsaw Safety (Ontario)

Chainsaw safety is critically important as chainsaws are often the most dangerous tool on a work site.

Emergency Preparedness and Response

OSHA requires employers to provide their employees with a safe environment to work.

Fire Watch

This online Fire Watch awareness course informs you on the roles and responsibilities of a designated Fire Watch and the basic steps of fire prevention.

Forklift - Safe Driving

This lesson is designed to provide workers with an awareness of the federal safety regulations for operating a forklift.

Knuckle Boom Crane (Articulating Crane) - CAN

This is a Canada-compliant safety training course intended for boom truck operators. Topics covered in this training include anatomy, stability, safe operations, and common hazards.

Managing a Worker on Modified Duties (WCB)

A worker informs you that they have symptoms that are work related and they have restrictions. What do you do? How do you manage this situation? What is the first step?

Rigging Safety (CAN)

Built in 2025, this course gives an in-depth look at the rigging hardware and attachments that a crane uses to lift, carry, and transport loads.

DOT Commercial Motor Vehicle Inspections

This online interactive course on DOT Commercial Motor Vehicle Inspections discusses Federal inspection and maintenance requirements, how they apply to drivers, and how drivers can help to prevent...

DOT Hours of Service

This course on DOT Hours of Service discusses the Department of Transportation’s “Hours of Service” regulations, what the regulations themselves require, and what drivers need to do to comply with...

First Aid Essentials

This online First Aid course discusses what employees should do and not do when someone is sick or injured, and how to determine when they should call for emergency assistance.

Boom Truck Safety (OSHA)

This comprehensive online Boom Truck course provides information on the safe operation of powered mobile cranes. This course meets OSHA requirements for powered industrial boom trucks.

Fall Protection for Construction

This online course is designed to help you recognize fall hazards and teach you to take the proper measures to ensure safety when working at heights. It covers regulations 29 CFR 1926 Subpart M.

Reasonable Suspicion Drug and Alcohol Testing for Managers and Supervisors

This course presents fundamental information for managers and/or supervisors on “Reasonable Suspicion” Drug and Alcohol Testing.

Safe Excavation

Developed with input from a cross-sector of industries, this new online Safe Excavation 0.25 days (up to 2 hours) course is aimed at developing safe excavation skills and attitudes.

First Aid Awareness

This online course teaches how to respond appropriately to injuries and medical emergencies. This course is appropriate for those with or without prior First Aid training.

Reasonable Suspicion Training for Alcohol and Substance Abuse

This online Reasonable Suspicion for Alcohol & Substance Abuse course is designed to to educate people who manage or supervise commercial drivers about how to identify and handle potential drug and...

Overhead Crane & Rigging Level 1

This course covers pre-use inspections, application and proper use of overhead cranes and rigging.

Conflict Resolution Series

The cost of conflict in the workplace is significant – up to $359 billion in lost productivity, and an average of 42% of your managers’ time is spent dealing with various conflicts.

Electrical Safety (CAN)

This course is an online training class for Electrical Safety. This course satisfies requirements for the classroom portion of safety training.

Excavator - Operator Safety (OSHA)

This online training course for Excavators (Trackhoe, 360-Excavators) will help employers and operators complete OSHA-compliant operator safety training and properly record it.

Fall Protection (SCS)

Backing and Parking: Straight Truck Series

This online Backing & Parking: Straight Truck Series course is designed to to help drivers understand the techniques that will help them avoid an accident or incident while backing and parking...

Hot Work

Many destructive fires are caused by hot work, or cutting, welding and other work that generates heat and sparks.

Battery and Charger Safety

Batteries provide electric power for equipment like forklifts, narrow-aisle trucks, airport vehicles, electric buses, autos and golf carts.

Crystalline Silica Awareness

Breathing is an act we often take for granted. Sometimes, what we breathe in can harm our bodies and cause lasting damage. That's definitely true of crystalline silica.

Continuously Improve for Safety Excellence

No matter how safe an organisation is or how high-quality its service and products are, there is always room for improvement.

DOT Driver Compliance (US)

This online DOT Driver Compliance course is designed to cover important U.S. Department of Transportation (DOT) rules that all Commercial Motor Vehicle (CMV) drivers are required to follow.

Fall Protection (UL)

Each year, many workers are hurt or killed as a result of falls in the workplace. Falls are usually complex events that involve a variety of factors.

Towing Trailers

This online Towing Trailers course is designed to provide an understanding of how towing a trailer affects the vehicle you are driving and what you can do as a driver to stay safe as you tow your...

Defensive Driving: Extreme Winter Driving with Skid Control/Recovery

Our premier, award winning Winter Driving course includes everything your employees need to know to drive safely and incident free in winter, covering all the basics as well as advanced skid...

Fire Extinguisher Safety

If you were confronted with a fire in your workplace, would you know whether to fight or flee? If you decide to fight the fire, do you know what to do?

Propane Filling and Handling Safety Awareness Course

The Propane Filling and Handling Safety Awareness Course is designed to provide a thorietical component or individuals who require knowlege in the proper safety protocols for the filling and...

Supervisor Skills

Every job has its own challenges. As a supervisor, you have the challenge of managing people, and this sets you apart from your employees.

Drug and Alcohol Abuse for Managers and Supervisors

This online Dealing with Drug and Alcohol Abuse for Managers and Supervisors course discusses drug and alcohol abuse, the damage it causes to workers and the businesses that employ them, and what...

Due Diligence for Workers

Learn as Milo, the Lead Occupational Health and Safety Officer, guides learners through the three types of safety laws, and how those laws can affect workers.

Rigging Safety in Industrial and Construction Environments

This online Rigging Safety course is designed to review the hazards associated with rigging and moving loads, and discuss the equipment and safe work practices that employees should use to avoid them.

Psychological Health and Safety eLearning Program

This Psychological Health & Safety a Universal Prevention eLearning Program for Mental Health & Wellbeing Training course is designed to teach individuals strategies that are proven to decrease...

Chainsaw Safety Training (OSHA)

An OSHA-Compliant Training Class Online for Chainsaw safety. This course covers basic chain saw safety as it relates to tree trimming, disaster clean-up, forestry and more.

Distracted Driving, Walking, and Operating Machinery

This online Distracted Driving, Walking, and Operating Machinery course is designed to discuss various types of distraction and the actions we can take to keep our attention on the task at hand.

Fire Safety Awareness

This online Fire Safety Awareness course will familiarize learners with fire prevention plans and how to create and implement them effectively.

Performing Safety Inspections - Global

Safety inspections help employers identify unsafe work conditions and practices, eliminate any barriers to safe, efficient production, recognize and share safer, more efficient ways to get the job...

ICS 200 Awareness

Basic Incident Command System, I-200 is an awareness level course that introduces how the Incident Command System (ICS) is used to manage Single Resources and the management required for initial...

Accident Procedures: Driver Training Series

This online Accident Procedures: Driver Training Series course is designed to help drivers understand what to do after being involved in (or witnessing) an accident.

Bear Awareness

Made in 2025, this course provides an overview of bear safety for the three bear species found in North America: the grizzly bear, black bear, and the polar bear.

Backing Techniques: Driver Training Series

This online course is designed to help reduce the number of backing accidents by teaching drivers how to recognize the dangers of backing and provide expert-level backing procedures.

Cold Stress

This online course provides proper training for employees who have prolonged exposure to cold working environments.

Construction Safety Basics: In Case of an Emergency

This online Construction Safety Basics: In Case of an Emergency course is designed to provide a high-level overview of a number of construction safety topics and safety rules to comply with OSHA...

Injury Prevention Around Flatbeds

There are a number of ways CMV drivers can injure themselves while on the job.

Lock-Out/Tag-Out

This online course helps stop unexpected startups with critical info on OSHA lockout/tagout requirements.

Defensive Driving (OSHA)

An OSHA-Compliant Training Class Online for defensive driving. This course satisfies OSHA's requirements for the classroom portion of operator safety training.

Compressed Gas Cylinder Safety - International

Compressed gas cylinders can be as explosively dangerous as a rocket or fragmentation bomb. This course teaches various aspects of how to manage them safely.

Fire Safety/Prevention Training (CAN)

This course satisfies Canada's requirements for the classroom portion of safety...

Aerial Work Platform Training - Boom and Scissor Lift

This Aerial Work Platform eLearning course will teach you everything you need to know to be a safe and effective aerial work platform operator. Get your certificate today!

Amphibious Excavator (CAN)

A Canada-compliant online training class for Digger Derricks. This course satisfies Canada's requirements for the classroom portion of operator safety training.

BCMSA - Musculoskeletal Disorders (MSD) Training for Supervisors

Supervisors play a key role in injury reduction. This course will introduce Supervisors to MSD risk assessment tools, a prioritization matrix and a cost-benefit matrix, designed to help you maximize...

Cargo Securement (OSHA)

This is an FMCSA-compliant safety training course intended for anyone loading and transporting cargo on flatbed trucks.

Concrete and Masonry Construction (CAN)

This is a Canada-compliant safety training course intended for anyone performing concrete and masonry work.

Earth Mover General (CAN)

Our general earth movers online training course provides a substantial, thorough, and effective way to learn how to work safely.

Excavation and Trench Safety (CAN)

Excavation and Trench safety online training, designed by trainers with 15+ years of onsite training experience. The estimated time for this training is 90 – 120 min.

Industrial Sweeper and Scrubber (OSHA)

This is an OSHA-compliant safety training course intended for industrial sweeper and scrubber operators. Topics covered in this training include anatomy, safe operations, and hazards.

Loader Backhoe - Operator Safety (CAN)

A Canada-Compliant Training Class Online for Loader Backhoes. This course satisfies Canada's requirements for the classroom portion of operator safety training.

OH&S and the Law for Supervisors

This online OH&S and the Law for Supervisors course offers a comprehensive understanding of the Occupational Health & Safety Act and other key pieces of health and safety legislation for those in...

Pallet Jack (Electric & Manual) (CAN)

An Canada-Compliant Training Class Online for pallet jacks (manual and electric). This course satisfies Canada's requirements for the classroom portion of operator safety training.

Rigger and Signalperson (Advanced) (OSHA)

This is an OSHA-compliant safety training course intended for experienced riggers and signalers.

Rigger and Signalperson (Intermediate) (CAN)

This is a Canada-compliant safety training course intended for riggers and signalers.

RT Crane (Rough Terrain) - Operator Safety (CAN)

This online Rough Terrain Cranes course covers important aspects of rough terrain cranes, including their components, hazards, rigging, and operations.

Tractor - Operator Safety (CAN)

This course is an online, Canada-Compliant Training Class for Tractors. This course satisfies Canada's requirements for the classroom portion of operator safety training.

Canada Hours of Service Training Module 1: Basics

Time is limited. No one can add a minute to an hour, day, or week. For professional drivers, time is further limited by the hours-of-service regulations.

CMV Drivers - Fatigue and Its Effects

This interactive course on Fatigue and Its Effects… for CMV Drivers discusses the factors that contribute to fatigue, the dangers of driving while you're fatigued… and the Federal Motor Carrier...

Heat Illness and Injury Prevention

This online course explains how heat affects the body, details the steps employees can take to prevent heat stress, and teaches elementary first aid that can be given to workers affected by...

Safety Awareness for New Employees

This online Safety Awareness for New Employees course addresses many of the most important safety issues confronting employees across a range of industries.

Spill Response

This online Spill Response Training course walks you through the process of responding to and properly cleaning up a workplace spill.

Trip Inspection for Commercial Carriers

This course teaches learners how conduct trip inspection based on the applicable commercial vehicle legislation.

Working Alone (Lone Worker)

It may seem obvious, but when you work alone your incident risk increases exponentially.

Bulldozer (Track & Wheel Dozers) - Operator Safety (CAN)

Bulldozer Training (both track and wheel dozers) for Canada Compliance. Quiz questions along the way prepare you for the final written exam.

Bulldozer (Track & Wheel Dozers) - Operator Safety (OSHA)

This is an OSHA-Compliant Training Class Online for Bulldozers, both track and wheel dozers which satisfies OSHA's requirements for the classroom portion of operator safety training.

Front End Loader - Operator Training (CAN)

An CSA/OHS-compliant online training course for front-end loaders (wheel loaders, payloaders, etc.).

Lawnmower - Operator Safety (CAN)

This course is an CSA Compliant Training Class Online for Lawnmower Safety in Canada.

Mini Excavator (CAN)

This course is an online, Canada-Compliant Training Class for Mini Excavators. This course satisfies Canada's requirements for the classroom portion of operator safety training.

Incident Investigations for Accidents & Near Misses

This online Incident Investigations for Accidents & Near Misses course is designed to help learners prepare for and conduct a thorough incident investigation.

Silica Safety in Industrial and Construction Environments

This online Silica Safety in Industrial and Construction Environments course explains the hazards that are associated with silica dust, reviews the OSHA standards for industry and construction, and...

Substance Abuse Training for Supervisors

This online Substance Abuse Awareness for Supervisors course helps supervisors understand how to recognize, document, and handle workplace situations involving substance abuse.

Digging Awareness (CAN)

Developed with input from a cross-sector of industries, our online Digging Awareness 2 hour course is intended to teach individuals of the hazards and safety requirements associated with ground...

Fire Extinguisher Use

This online course looks at why things burn, reviews the types of fire extinguishers that are found in facilities today, and discusses how to use fire extinguishers to fight small fires.

Work Zone Safety

This online Work Zone Safety course Work Zone Safety discusses the hazards that are associated with performing roadway construction and maintenance, and the equipment and safe work practices that...

Overhead Crane - Operator Training

This Newly designed Overhead crane operator training course is designed for new and experienced operators wanting to recertify.

Air Brake Refresher

This online course is an ideal refresher for drivers or companies needing air brake training.

AMTA (2024) Federal Hours of Service (Canada)

Hours of Service (HOS) regulations are crucial in the driving industry, especially in sectors such as commercial trucking, where dangerous fatigue-related incidents may occur.  This course explains...

Effective Communication Skills

The essence of relationships is communication. It is through communication that people share information, make decisions, solve problems, and accomplish their day-to-day jobs.

BC Safe Driving

This online course is a comprehensive defensive driving program designed to teach responsible driving practices and help drivers of all experience levels become better drivers.

Accidental Release Measures & Spill Cleanup Procedures

Accidental Release Measures & Spill Cleanup Procedures is designed to help facilities comply with OSHA's HAZWOPER regulation (29 CFR 1910.120).

Hours of Service Training Module 1: Basics

This training program provides property-carrying CMV drivers with a thorough explanation of the Hours of Service Regulations, including how the rules help improve their safety and productivity.

Building My Emotionally Intelligence

You do not have to possess a formal leadership title to be a leader. This course has been designed to give you the competencies and the mindset to lead yourself and others towards a common purpose.

Ammonia Awareness

Ammonia has a variety of uses. It is used as a refrigerant, a cleaning and bleaching agent and a household cleanser. It is also used to produce fertilizers, plastics, explosives and pharmaceuticals.

Avoiding Rear-End Collisions - Large Vehicles (US)

This online Avoiding Rear-End Collisions for Large Vehicles course is designed to provide an understanding of common causes of rear-end collisions and what large vehicles drivers can do to reduce...

Customer Service Basics

Most of us interact with customers in some way. Whether we call them customers or clients, and whether they are outside the company or inside the company, all of us tend to interact with customers...

Email and Text Etiquette

This series explores the advantages and disadvantages of using email and text messages in the workplace and helps explain times when neither are appropriate.

Hot Work for Construction

This course covers hazards, safety precautions, responsibilities and emergency procedures associated with this dangerous but necessary work.

Integrated Health and Safety

This course, comprised of seven instructional modules, provides an understanding of how workplace health and safety programs can be made more impactful and effective by integrating them strategically.

Personal Behaviors and Conduct

Character, integrity and personal conduct matter. They matter in our personal life and they matter at work too.

Preventing Back Injury

Have you ever had a sharp pain in your back? In addition to being painful, back ailments can be debilitating and may prevent you from working.

Preventing Workplace Harassment - Managers

Victims of harassment have well-established rights under federal law and, in many cases, under state and local law, too.

Safety Everywhere: Staying Safe on Two Wheels

This online Safety Everywhere - Staying Safe on Two Wheels course is designed to review some basic safety advice you can use to avoid accidents and injuries.

AED/CPR Training Program

This online course provides automated external defibrillation (AED) and cardiopulmonary resuscitation (CPR) skills review and practice using realistic scenarios.

Mental Health Awareness (OSHA)

This is a Training Class for Mental Health Awareness.

Biosafety Hazardous Waste Handling and Disposal (US)

If you work with biological materials, it is quite possible that you will produce hazardous waste. What types of hazardous waste might you produce?

Trench Safety - Operator Safety (OSHA)

This online training course for Trench Safety will help employers and operators complete OSHA-compliant operator safety training and properly record it.

Drug & Alcohol Awareness (OSHA)

Drug and Alcohol Awareness Training Online. EEOC-Compliant. This course satisfies requirements for the classroom training. Quiz questions along the way prepare you for the final written exam.

Agricultural Machinery Safeguarding

The training program for safeguarding agricultural machinery for protecting the health and safety of agricultural workers includes elements that will guide farm owners, managers and their workers on...

Incident Analysis (Investigation)

Through animation, learn as Bellamy Barrier, the Safety Manager, teams up with Guru Gus, who remembers every incident that ever happened at Pablo Industries.

Managing Conflict

As workforce numbers shrink, and individuals are called to interact more intensely with fewer people, the ability to manage conflict effectively becomes more important.

Canada Labour Code – Part II

This online Introduction to the Canada Labour Code – Part II course introduces participants to federal health and safety legislation, and explains the health and safety practices and processes that...

Incident Investigation Online

This course will explain how you can turn safety incidents into opportunities for continuous improvement.

Back Safety and Injury Prevention

The purpose of this lesson is to familiarize individuals who have physically demanding jobs (e.g.

Basic First Aid

In this lesson you will learn how to identify the seriousness of an injury or illness, how and when to call emergency medical services, how to determine the most appropriate next steps when...

Confined Spaces

This lesson educates all general industry employees about the existence of confined spaces, the type of hazardous conditions that can be present in them, and the basic requirements for entry into...

Discrimination-Free Workplace

This online course defines discrimination, outlines responsibilities for prevention, and explains appropriate responses to occurrences of discrimination.

Environmental Management

This lesson teaches the industrial sources of land, air, and water pollution, the health dangers that environmental pollutants present, and the types of actions that industrial facility workers must...

Excavation, Trenching, and Shoring Safety

After completing this lesson, you will be able to recognize the characteristics of a properly-established excavation site, as well as the potential hazards you may encounter when working in and...

Forklift - Inspection and Maintenance

This lesson is designed to provide workers with an awareness of the federal safety regulations for operating a forklift.

Hazardous Waste Management

Define a hazardous waste, recognize standards that regulate hazardous waste, and identify requirements of hazardous waste management.

Lead Awareness

This course will help you recognize where lead is found, the occupational hazards and health effects of lead exposure, and the responsibilities that you and your employer have to minimize your lead...

Safety Audits

The goal of this lesson is to provide awareness training for managers, supervisors, and general employees on the importance of safety audits and how to plan and conduct an audit.

Slips, Trips, and Falls in the Workplace

This lesson will teach you to identify hazardous workplace conditions and unsafe practices that can lead to slips, trips, and falls and how to prevent incidents through good housekeeping practices...

Workforce Hazard Recognition Training

This course assists workers to recognize workplace risks and provides them the ability to identify and eliminate risky actions and conditions that can turn into safety problems or expensive incidents.

Computer Security

This lesson describes ongoing threats to computer security and emphasizes the importance of protecting an employer's digital property.

Fire Extinguishers: Monthly Inspections Refresher

This course provides you with information on how to perform monthly fire extinguisher inspections, including how to identify and visually inspect each part of an extinguisher.

First Aid - Choking

This lesson provides instruction on how to respond confidently to an airway obstruction until professional medical help arrives. This program does not qualify for first aid or CPR certification.

Electrical Safety for Construction: Power Lines and Lockout/Tagout

This training will tell you more about electrical hazards in construction work, safe practices when working with electricity, and how a lockout/tagout program can save your life.

Alberta Provincial Hours of Service

These regulations are crucial for ensuring driver safety and compliance with work-hour limits. Understanding these regulations helps prevent driver fatigue and promotes safer roadways for everyone.

Defensive Driving Fundamentals

This award winning internationally recognized Defensive Driving program features the proprietary 5 Fundamentals of Defensive Driving: Think and Look Ahead, Anticipate Hazards, Keep Your Options...

Coupling and Uncoupling: Driver Training Series

This truck driver training online course is designed to help drivers understand the techniques that will help them with safely coupling and uncoupling their tractor-trailer.

Extreme Weather Driving: Driver Training Series

This online Extreme Weather Driving: Driver Training Series course is designed to help drivers understand the basic driving techniques that will help them safely operate a CMV when driving in...

Fit for Duty

This online course informs you on what it means to be Fit For Duty, and how you can help your organization create policies that encourage a healthier workplace.

New and Young Worker Health and Safety

This online course is designed to provide new and young workers with the essential knowledge and skills to stay safe and healthy at work.

OHS Laws & Regulations for Supervisors

This course is critical for supervisors including forepersons, team leads, managers and health and safety representatives.

Respiratory Protection

This online Respiratory Protection Training course is designed to teach you about the different types of respirators available and how to wear/use them.

Scaffold Safety Awareness

This awareness-level course provides employees with vital information to help them recognize unsafe practices and to work safely on and with scaffolds.

Hearing Protection Training

This online Hearing Protection Training course is designed to introduce you to personal hearing protection equipment and how to select, fit, and maintain it.

Effective Use of PPE

That’s why we created the Effective use of Personal Protective Equipment (PPE) safety series, a fun (yes, fun) training course designed to show you how to protect all your favorite parts of you.

Asbestos Awareness (OSHA)

An OSHA-Compliant Training Class Online for Asbestos - General Awareness (construction and general industry). This course satisfies OSHA's requirements for the classroom portion of safety training.

Defensive Driving - Small Vehicles

This online Defensive Driving for Small Vehicles (Global) course is designed to explore safe driving practices, what to do before you drive, while you drive and in the event of an accident.