Tap a page to see it full size.
Toolbox Talks
Roofing – Toolbox Talk
Roofing work is never “just another task.” This Roofing Toolbox Talk equips your crew to prevent deadly falls, ladder slips, and heat-related injuries while working on rooftops.
- Page 1: topic overview, key hazards and best practices
- Page 2: crew sign-in sheet
- Page 3: leader guide for the supervisor
- See how it works below ↓See how it works below ↓
Written by certified COR auditors · Trusted by Canadian contractors for 17+ years · Secure Stripe checkout · Instant delivery + re-download any time from your purchases page
How this talk works
- — Read it to the crew. Why it matters, the key hazards, best practices, a quick self-check and the legislation behind it.
- — Everyone signs. The topic is filled in; add the date, site, presenter, attendees and any follow-up actions. Keep it on file as the record of who attended, which is what COR/SECOR and prequalification auditors look for.
- — Supervisor prep. How to run the talk, discussion questions, visual aids and engagement ideas, and related training.
About this talk
Roofing work is never “just another task.” This Roofing Toolbox Talk equips your crew to prevent deadly falls, ladder slips, and heat-related injuries while working on rooftops.
It reinforces safe access, proper anchorage, fall protection systems, and material management—because most roofing injuries happen during routine tasks in unpredictable conditions.
Ideal for construction, maintenance, and service crews performing any form of residential, commercial, or industrial roof work.
What you get
3-page Toolbox Talk Kit
1-page Topic Overview
covers edge protection, skylight hazards, ladder safety, material control, and weather monitoring
1-page Supervisor Guide
includes harness demo ideas, roof walk prep, discussion prompts, and inspection reminders
1-page Printable Sign-In Sheet
formatted for COR/SECOR, ISNetworld, and safety audit documentation
Why this one and not a free handout
- This talk tackles real roof risks—not just policies: Emphasizes fall protection hierarchy (guardrails → warning lines → PFAS)
- Discussion prompts like: “Have we checked our lifelines before going up?” Live tools: edge hazard walkthrough, anchor inspection, real incident examples
- Highlights that most fatal roofing falls happen in the first two hours of work
“Have we checked our lifelines before going up?”
Who it is for
- Construction, maintenance, and restoration crews
- Roofers, carpenters, and scaffold users
- Projects requiring fall protection above 3 metres (10 feet)
- OH&S Part 9, WorkSafeBC Part 11, and COR/SECOR-aligned programs
Written to
- WorkSafeBC Part 11
- Cited on the original product page
Common questions
Before you buy
What people ask us about the Roofing – Toolbox Talk.
What is included in the Roofing toolbox talk?
A ready-to-run safety meeting on roofing, written for Canadian worksites and formatted so a supervisor can pick it up and deliver it without preparation. It includes a leader guide with the discussion points to work through. It also includes a printable sign-in sheet for recording who attended.
How long does the Roofing toolbox talk take to run?
Most crews get through a talk in ten to fifteen minutes, which is what a pre-shift or tailgate meeting can absorb without cutting into the work. The material is written to be read aloud and discussed rather than presented.
Does this count as evidence in a COR, SECOR or ISNetworld audit?
The completed sign-in sheet is the record an auditor generally looks for as evidence that the talk happened and who was there, so keeping the signed sheets on file is what gives the talk its value at audit time. A toolbox talk is hazard communication, though, not formal training - it does not replace certification or competency training where a regulation or a prime contractor requires it.
What format is it, and when do I get it?
It is a digital download in a print-ready format, available immediately after checkout. Print as many copies as your crews need - the licence covers use inside your own company.
Can we add our company name to it?
Yes. The talk is meant to go into your own safety program, so you can add your company name and issue it as your own record.
Who should deliver the Roofing talk?
Whoever runs the pre-shift meeting - normally a supervisor, foreman, or a competent worker familiar with the task. The guide is written so the person delivering it does not need to be a safety professional.
From the team that wrote it
A toolbox talk is one piece of a program.
Talks like this one prove your crew was trained on the day. The rest of the evidence - the manual behind it, and the training records an auditor asks for - is what we build.